IT-Label partner

How digital is your building, really?

Fibre in the meter cupboard says very little. What matters is what comes out of the wall on the third floor. We measure it, and you get an IT-Label that tenants and buyers can rely on.

Or test your internet speed for free, in half a minute.

The IT-Label runs from IT1+ to IT5. Click a level for an explanation.

The IT-Label in 40 seconds

What the label is, how it works and how we help you. Short and visual.

The IT-Label

How digital is your building, really?

Explained in 40 seconds.

Prefer to read? See the explanation as text
  1. The IT-Label. How digital is your building, really?
  2. What is it? Like an energy label, but for digital infrastructure. Six levels, from IT1+ to IT5. Independently assessed, with no pass or fail: the label shows what is in place.
  3. What is measured? Connectivity, Infrastructure, Performance, Scalability, Integration and Smart Building.
  4. How does it work? You apply, we audit on site, and you get a label from IT1+ to IT5 and a certificate that is valid for two years.
  5. How we help. With a pre-inspection you know where you stand. With the IT-Label audit you receive the official certificate. With digital due diligence you know what you are buying.
  6. Which label would your building get? Take the free self-scan, or schedule a pre-inspection straight away.

A tenant signs a five-year lease. After the move, the WiFi in the corner of the floor turns out not to work, and the connection drops when everyone is on a video call at once. Nobody had checked.

Floor plan of an office floor with three WiFi access points. Blue is good coverage. In the bottom right corner, near the desks, there is no coverage.
Example of a WiFi measurement. Blue means good coverage. In the bottom right the signal drops out, exactly where people work.

Usually this is not down to bad intentions. The digital quality of a building was simply never recorded anywhere. So nobody knows exactly: not the owner, not the agent and not the tenant.

The IT-Label changes that. It works like an energy label: one code that shows how the building performs digitally. Independently assessed, valid for two years. How the IT-Label works

From the meter cupboard to the roof

We do not just look at what is on paper. We walk through the building and measure where people actually work.

Cross-section of a commercial building with six numbered assessment points: incoming fibre, technical room, cabling per floor, WiFi per room, building systems and mobile coverage on the roof.
From the meter cupboard to the roof: these are the six points we assess in a building.
  1. Fibre coming inWhich connection is there, how much capacity it has and how stable it is.
  2. The technical roomWhere the equipment is, and how it is cooled and secured.
  3. Cabling per floorWhich type of cable is installed and whether there is room to expand.
  4. WiFi per roomWe measure coverage and speed where people actually work.
  5. Building systemsAccess, climate, cameras and booking, and whether they are linked.
  6. Backup and mobile coverageWhat happens if the main connection fails, and whether you can make calls indoors.

More about Smart Building and IoT

What you get from us

Not a thick report that disappears into a drawer. Instead: a label, a score per component and a short list of what to do first.

On the right you can see what the summary of a pre-inspection might look like. The building is fictional.

More about the pre-inspection
Example of the summary of a pre-inspection of an office building: indication IT3 Ready, a score per component, the first three improvements and IT2 as the achievable level.
This is what the summary of a pre-inspection looks like. The building is fictional.

What you can expect from us

This is how we work, for every building and every assignment.

  • No interest in the outcome

    We establish what is in place. We have no interest in a higher or lower outcome.

  • We measure where people work

    Not just at the meter cupboard, but also at the workstations, in the meeting rooms and in the corners of the floor.

  • A report you understand without IT knowledge

    A label, a score per component and a short list of what to do first.

  • A fixed price in advance

    You know what it costs before we start. So there are no surprises.

  • Honest advice

    We tell you what we see. Even if the answer is that your building is fine as it is.

  • IT-Label Certified Partner

    We work according to the fixed IT-Label method. The label you receive is official and valid for two years.

Questions we often get

Is your question not listed? Just send it to us.

Is a pre-inspection the same as an audit?

No. After a pre-inspection you know which label your building is likely to achieve and what you can improve. You only receive the official IT-Label and certificate after an on-site audit with measurements.

What if my building gets a low label?

Then everyone knows exactly what is in place. That is the whole point. The IT-Label does not say whether a building is good or bad. It shows what is there. For a tenant who wants to do their own fit-out, IT4 can be perfectly fine.

What does it cost?

A pre-inspection by an expert starts from €750 excl. VAT. For an IT-Label audit or digital due diligence, the price depends on the size and type of building. You always receive a fixed price in advance. Request a proposal.

Start with two minutes

Nine questions about your building. You see straight away which label it is likely to achieve, and where the gains are.